PondCare PH Test Kit

A complete kit to measure and adjust pH. Tests pH levels from 6.0 to 7.6 and includes bottles of pH Up and pH Down to modify aquarium water pH to desired levels. 250 Tests per kit.

Directions for Testing pH:

• Read thoroughly before testing. Do not allow Test Solutions to get into aquarium.
• To remove childproof safety cap: With one hand, push red tab left with thumb while unscrewing cap with free hand.
  • Fill a clean test tube with 5 ml of water to be tested (to the line on the tube).
  • Add three drops of Indicator Solution, holding dropper bottle upside down in a completely vertical position to assure uniformity of drops
  • Cap the test tube and invert tube several times to mix solution. Do not hold finger over open end of tube, as this may affect the test results.
  • Determine the pH reading by matching the color of the solution against those on the pH Color Chart. The tube should be viewed against the white area beside the color chart. Color comparisons are best made in a well-lit area. The closest match indicates the pH of the water sample. Rinse the test tube with clean water after each use.

pH Up:

• Contains sodium hydroxide
• Causes burns
• Keep locked up and out of the reach of children
• In case of contact with eyes, rinse immediately with plenty of water (at least 15 minutes) and seek medical advice
• After contact with skin, wash immediately with plenty of water. Remove contaminated clothing
• Wear suitable gloves and eye/face protection
• In case of accident or if you feel unwell, seek medical advice immediately (show label where possible)

pH Down:

• Irritating to eyes and skin
• Keep out of the reach of children
• In case of contact with eyes, rinse immediately with plenty of water (for 15 minutes) and seek medical advice
• After contact with skin, wash immediately with plenty of water. Remove contaminated clothing
• Never add water to this product.

Be the first to review PondCare PH Test Kit